MultiFlex | MF80X

Waste Storage & Collection Areas

SOLUTION FOR WASTE & COMPACTOR ODOURS, TARGETS THE ODOUR SOURCE

REMOVE ODOURS, CONTROLS INFECTION & IMPROVE HYGIENE

  • Stops odours at their source – Reduces harmful viruses
  • Breaks down bacteria
  • Stops Mould and fungi growth
  • Works in the toughest environments
  • No chemical residue or moisture after treatment
  • Low maintenance, clean and lamp change once a year

PERFECT FOR USE

  • Waste compactors rooms
  • Bin store rooms
  • Persistent extreme odour areas
  • Waste processing areas

Would you like to know more: write to us at livvair@livvsafe.com

210,000.00

Check Availability At //

 

ODOUR & INFECTION PROBLEMS

Global Environmental Protection legislation makes it an offence to manage waste in a manner likely to cause harm to human health or the environment, this includes offence to the senses. Businesses that have onsite compactors to manage their waste are all subject to odour control regulations.

Cleaning, filtration and chemical dosing cannot control the source of the odours whilst masking odours with strong fragrances will only have a limiting effect. In just 8 hours one bacteria can multiply to 8 million*, left uncontrolled this further breaks down waste and magnifies the odour issues. Attempting to mask these odours will simply not work and can make the environment much more unpleasant with the combination of bacteria waste odours, rotting matter and fragrances.

*Certain bacteria such as Ecoli can replicate every 20 minutes, which could in theory leave you with 16.7 million in 8 hours, what we are highlighting is that bacteria breed very quickly and cannot be controlled with traditional methods.

BENEFITS OF USING AIRSTERIL MF80X

> Control odours 24/7
> Eliminates need for fragrances
> Improves environment for all
> Eliminates visitor complaints

PERFECT FOR USE

> Waste compactors rooms
> Bin store rooms
> Persistent extreme odour areas
> Waste processing areas

Bentonite Clay Skin Benefits
HOW AIRSTERIL TECHNOLOGY WORKS

A combination of technologies working together:

Internal
– Germicidal Irradiation by dual UV light (Ultraviolet) kills microorganisms (bacteria, viruses and mould) by disrupting their DNA and removing their reproductive capabilities.
– PCO – Photocatalytic Oxidation, UV reacts with our Catalyst (Ti02) to form highly reactive but short lived oxidising Hydroxyl Radicals (OH) which break down Volatile Organic Compounds (VOCs).
– Interaction of the Dual waveband UV with the TiO2 heterogeneous catalyst both creates and breaks down Oxygen molecules transforming Oxygen into a highly reactive states of Ozone and Superoxide Ions which leave the unit as “Plasma Quatro”.

Transmitted Technology
– The negatively charged Superoxide Ions charge airborne contaminates causing them to cluster together and fall from the air as they become too heavy, aiding all other processes. This can remove airborne particulates down to 0.0001 micron, that’s better than any HEPA filter.
– Targeted Ozone produced via the specialist lamp gets the hardest to the hardest to reach areas breaking down contamination in the air and on exposed surfaces. Ozone damages the cell wall of microorganisms stopping reproduction and destroying the cell.

Bentonite Clay Skin Benefits
HOW OUR MULTIFLEX SYSTEM WORKS

All AIRsteril units utilise our unique combination of 5 technologies. They eliminate unpleasant odours and control harmful bacteria and viruses 24 hours a day, 365 days of the year.

The MF units are suitable for use in areas of continuous occupation in enclosed spaces. The number in the unit code signifies the floor area – an MF40 covers 40m2 and an MF80 covers 80m2. For larger areas a combination of MF units is used, for infection control only a lower powered unit can be used.

The MF is fan driven and can easily be ceiling or wall mounted for continuous operation via a fused spur, or plugged in. Alternatively it is supplied with rubber feet and can be placed on a high surface.

Bentonite Clay Skin Benefits
OPERATION AND SAFETY

The unique balance of technology used by AIRsteril has been tried, tested and refined over many years to ensure the best achievable results with every unit is supplied.

– Due to the unit design UV light cannot escape the unit from any angle meaning it is completely safe.
– Ozone levels used are substantially below the most stringent emissions regulations worldwide
– The fan is shielded behind a protective end cap to avoid potential injury
– Power via a plug and push connector allows installation without loose cables and easy connection to existing sockets

AIRSTERIL IS AN IDEAL SOLUTION

Healthcare environments are particularly vulnerable to bacteria and viruses, incontinence or special medical conditions create high levels of bacteria which can adversely affect patients and staff alike. Cleaning surfaces and fabrics cannot eliminate microorganisms, nor clear odours, a single bacteria cell can multiply to over 8 million in an 8 hour period*; odours prevail and health risks will remain.

Where people congregate there are risks of cross infection; even desks and keyboards can harbour harmful levels of bacteria and viruses. Changing rooms and storage areas are often prone to mould and the associated health risks.

*Certain bacteria such as Ecoli can replicate every 20 minutes, which could in theory leave you with 16.7 million in 8 hours, what we are highlighting is that bacteria breed very quickly and cannot be controlled with traditional methods.

TECHNICAL DETAILS

MF RANGE DIMENSIONS //

430mm (l) x 130mm (w) x 100mm (d)


POWER SUPPLY //

220-230V 33 watts


SET UP //

Wall or ceiling mounted. Easy for marking, four fixing points.


CONSTRUCTION //

Anodised aluminium extrusion


WEIGHT //

2.4kg


OPERATION //

Continuous, indicated by blue lamp. Requires annual lamp change.

 
SERVICING MADE EASY

Power must be disconnected before attempting any servicing and only undertaken by a competent individual. All AIRsteril partners have fully trained engineers to carry out all servicing work.

The MF cover is easily removed by taking out four screws, then the two finger screws removed from the lamp housing plate allow lamp replacement.

Any dust or debris build up should be cleared from the fan and interior. Lamps must be changed on an annual basis to maintain performance.

Additional information

Watts

33 Watts

Power Supply

220-230V

Weight

2.4 kgs

Setup

Wall or ceiling mounting. Easy marking and fixing at four points.

Operation

Continous, indicated by blue lamp. Requires annual lamp change.

Construction

Anodised aluminium extrusion

Disclaimer

LIVVSafe, endeavours to ensure that the product information displayed is accurate and up to date. Product information is provided by the manufaturer the ingredients are liable to change from time to time depending on availability. Please read the product label before using or consuming any product. Do not rely solely on the information presented here.
If you require any additional information or have a query about a LIVVSafe branded product, kindly write to us at customercare@livvsafe.com

Reviews

There are no reviews yet.

Be the first to review “MultiFlex | MF80X”