WASHROOM PROBLEMS
In washrooms, odours and infections are created by bacteria, viruses, mould, fungi and volatile organic compounds in the air and on all exposed surfaces. Fragrances or masking agents do nothing towards hygiene and the health risks remain. Cleaning and disinfecting alone are only a partial solution and cannot stop ongoing surface contamination. Poor cleaning practices can make the problem worse, as contaminated mops or cloths distribute bacteria. In eight hours a single bacteria cell can multiply into over eight million, meaning odours prevail and health risks increase.
AIRsteril kills both surface and airborne bacteria and viruses. Its efficacy was certified to do this by the UK Health Protection Agency laboratories.
Area Size | 5m2 | 10m2 | 20m2 | 3om2 |
Low/medium footfall washrooms | WT5 | WT10 | WT20 | WT30 |
Washrooms are a primary source of infections including: salmonella, e.coli, rhinovirus, norovirus, influenza, pneumonia, hepatitis A, hepatitis E and clostridium difficile. Many of us have our immune systems compromised at certain times meaning we are at a higher risk.
HEALTHCARE PROBLEMS
– Offensive odours
– Visitors perceive poor hygiene, lack of care and poor management
– Increased health risks including kidney infections, common colds and food poisoning
– Increased absenteeism and staff turnover
PERFECT FOR USE IN – All washrooms
> Home Washrooms
> Office Washrooms
> Factory Washrooms
> Accessible Washrooms
> Baby Change Facilities
> Sluice Rooms
HOW AIRSTERIL TECHNOLOGY WORKS
PHOTO CATALYTIC OXIDIZATION POWERPACK UNIQUE TO AIRSTERIL
A combination of technologies working together:
Internal
– Germicidal Irradiation by dual UV light (Ultraviolet) kills microorganisms (bacteria, viruses and mould) by disrupting their DNA and removing their reproductive capabilities.
– PCO – Photocatalytic Oxidation, UV reacts with our Catalyst (Ti02) to form highly reactive but short lived oxidising Hydroxyl Radicals (OH) which break down Volatile Organic Compounds (VOCs).
– Interaction of the Dual waveband UV with the TiO2 heterogeneous catalyst both creates and breaks down Oxygen molecules transforming Oxygen into a highly reactive states of Ozone and Superoxide Ions which leave the unit as
“Plasma Quatro”.
Transmitted Technology
– The negatively charged Superoxide Ions charge airborne contaminates causing them to cluster together and fall from the air as they become too heavy, aiding all other processes. This can remove airborne particulates down to 0.0001 micron, that’s better than any HEPA filter.
– Targeted Ozone produced via the specialist lamp gets the hardest to the hardest to reach areas breaking down contamination in the air and on exposed surfaces. Ozone damages the cell wall of microorganisms stopping reproduction and destroying the cell.
HOW OUR WASHROOM SYSTEM WORKS
The AIRsteril washroom units utilise our unique combination of 5 technologies. They eliminate unpleasant washroom odours and control harmful bacteria and viruses both in the air and on all exposed surfaces 24 hours a day, 365 days of the year.
The custom designed thermal convection system ensures that contaminated air processed through the unit achieves optimum dwell time in the purifying chamber. As the processed air leaves the unit, it then itself becomes an efficient cleaning agent. The 2 number in the unit code signifies the floor coverage area – an WT10 covers 10m and an WT30 covers 30m2. With minimal maintenance and low energy consumption of 10w, the units provide constant clean, fresh sanitised washroom air. With no filters to change, and minimal maintenance, they provide a green solution lifting washroom hygiene for all users.
OPERATION AND SAFETY
The unique balance of technology used by AIRsteril has been tried, tested and refined over many years to ensure the best achievable results with every unit is supplied.
-Due to the unit design, UV light cannot escape the unit from any angle meaning it is completely safe.
-Ozone levels used are substantially below the most stringent emissions regulations in the world.
-All electrical connections enter the unit via a single insulated cable and are completely shielded internally by the cover.
-No fan is used in this unit, making it completely silent.
DEMONSTRATION OF HOW AIRSTERIL TECHNOLOGY WORKS AND
OUTPERFORMS OTHER PRODUCTS ON THE MARKET.
SCIENTIFICALLY PROVEN PRODUCTS MADE BY SPECIALISTS IN AIR PURIFICATION
See how our technology outperforms the competition and trusted by world leaders as seen in cop26.
AIRsteril technology is proven to clear 99.9% of airborne germs within 10 minutes. We have over 10 years of proven testing with professional laboratories both in the UK and internationally, AIRsteril is the name you can trust.
The air around us contains microorganisms, bacteria, viruses, moulds, fungi and volatile organic compounds. Airborne microorganisms can create offensive odours, spread infections and be responsible for the continued growth of mould.
Microorganisms are deposited on surfaces from the air where they continue to grow, magnifying odour issues and the risk of infections. Standard room cleaning and disinfecting procedures can only offer a temporary solution. As soon as an area is cleaned the airborne microorganisms immediately begin to settle, recolonizing the surfaces and increasing the odour and infection problems. Many places still only use fragrances which attempt to mask odours and do not target the source; the contamination both in the air and on surfaces.
AIRsteril technology changes all of this…
TECHNICAL DETAILS
WT10/20/30 DIMENSIONS //
400mm (l) x 125mm (w) x 90mm (d)
POWER SUPPLY //
220-230V 10 watts (via 13a switched fused spur)
SET UP //
Vertical wall mounting only. Easy marking and fixing at four points.
CONSTRUCTION //
Polycarbonate Moulding – Available in white or titanium look finish
WEIGHT //
0.9kg
OPERATION //
Continuous, indicated by blue lamp. Requires annual lamp change.
SERVICING MADE EASY
Power must be disconnected before attempting any servicing and only undertaken by a competent individual. All AIRsteril partners have fully trained engineers to carry out all servicing work.
The front cover is easily removed by taking out two screws, then the lamp can be replaced by a simple push in connection. Any dust should also be cleared from the unit. Lamps must be changed on an annual basis to maintain performance.
Reviews
There are no reviews yet.