Washroom Thermal | WT20
WASHROOM PROBLEMS
Washrooms are a primary source of infections including: salmonella, e.coli, rhinovirus, norovirus, influenza, pneumonia, hepatitis A, hepatitis E and clostridium difficile. Many of us have our immune systems compromised at certain times meaning we are at a higher risk.
In washrooms, odours and infections are created by bacteria, viruses, mould, fungi and volatile organic compounds in the air and on all exposed surfaces. Fragrances or masking agents do nothing towards hygiene and the health risks remain. Cleaning and disinfecting alone are only a partial solution and cannot stop ongoing surface contamination. Poor cleaning practices can make the problem worse, as contaminated mops or cloths distribute bacteria. In eight hours a single bacteria cell can multiply into over eight million, meaning odours prevail and health risks increase.
AIRsteril kills both surface and airborne bacteria and viruses. Its efficacy was certified by the UK Health Protection Agency laboratories.
Scientist have show how 40% of the plum spreads from the commode into the washroom each time it is flushed.
Know more
HEALTHCARE PROBLEMS
> Offensive odours
> Visitors perceive poor hygiene, lack of care and poor management
> Increased health risks including kidney infections, common colds and food poisoning
> Increased absenteeism and staff turnover
PERFECT FOR USE IN
> Powder Rooms
> Home Washrooms
> Private Office Washrooms
| Area Size | 5m2 | 10m2 | 20m2 | 3om2 |
| Private & Domestic washrooms | WT5 | WT10 | WT20 | WT30 |


HOW OUR WASHROOM SYSTEM WORKS
The AIRsteril washroom units utilise our unique combination of 5 technologies. They eliminate unpleasant washroom odours and control harmful bacteria and viruses both in the air and on all exposed surfaces 24 hours a day, 365 days of the year.
The custom designed thermal convection system ensures that contaminated air processed through the unit achieves optimum dwell time in the purifying chamber. As the processed air leaves the unit, it then itself becomes an efficient cleaning agent. The 2 number in the unit code signifies the floor coverage area – an WT10 covers 10m and an WT30 covers 30m2. With minimal maintenance and low energy consumption of 10w, the units provide constant clean, fresh sanitised washroom air. With no filters to change, and minimal maintenance, they provide a green solution lifting washroom hygiene for all users.

OPERATION AND SAFETY
The unique balance of technology used by AIRsteril has been tried, tested and refined over many years to ensure the best achievable results with every unit is supplied.
-Due to the unit design, UV light cannot escape the unit from any angle meaning it is completely safe.
-Ozone levels used are substantially below the most stringent emissions regulations in the world.
-All electrical connections enter the unit via a single insulated cable and are completely shielded internally by the cover.
-No fan is used in this unit, making it completely silent.
SERVICING MADE EASY
Power must be disconnected before attempting any servicing and only undertaken by a competent individual. All AIRsteril partners have fully trained engineers to carry out all servicing work.
The AS cover is easily removed by taking out two screws from the base, then the two finger screws removed from the lamp housing plate to allow lamp replacement. Any dust or debris build up should be cleared from the interior. Lamps must be changed on an annual basis to maintain performance.
NOTE: ALWAYS WERE GLOVES WILL HANDLING THE LAMP




Reviews
There are no reviews yet.